Title: QC Inspector- Pipe
Department: QC
Plant: AB&I Foundry
Reports to: QC Manager
General Function:
To enforce production procedures to maintain product that
meets customer specifications through process /product control and inspection.
Duties/ Responsibilities:
1.
Perform process and product inspection to assure
compliance with S.O.P.’s and CISPI 301, ASTM A74 standards.
2.
Has
authority to request corrective actions in cases of non-compliance.
a.
Dimensional inspection (measuring and recording)
of one pipe of each barrel of every pipe size ran to meet CISPI 301 or ASTM A74
requirements. This has to be done in the
morning once per every 12 hours of production.
b.
Pipe leak testing of one pipe of each mold of
all pipe sizes running every 1 hour to 1.5 hours. Notify Pipe machine operator
and or Pipe department supervisor of the problem. Fill out pipe leak report. Return
sample pipes to production.
c.
Ring check pipe for white iron and check inside
for gas bubbles. Inform pipe department supervisor and or pipe machine
operator. Done 7-9 times a day on pipe leak testing samples.
d.
Check pipe thickness with go-no go gauge. Few
times a day.
e.
Count, record, dump pipe scrap. Fill out scrap
report. Done daily.
f.
Visually inspect pipe appearance and quality of
print. At least 3 times per day.
g.
Visually inspect bundled pipe for cracked,
broken, thin or thick ends.
h.
Relieve pipe finishing team members’ breaks as
needed.
i.
Perform various miscellaneous duties as
required.
Requirements:
1. Ability to speak, write and understand English. Bi-lingual preferred.
2. Must be able to use measuring equipment.
3. Must be able to understand basic math and perform some
basic calculations.
4. High school diploma or equivalent.
5. Must be able to work independently.
6. Must be dependable, detail oriented and cooperative.
7. Demonstrate ability to follow directions.
8. Must wear proper PPE and follow safety procedures.
9. Must be able to drive a forklift.